Software to Make a Dead Flash Drive Turn on Again

Summary :

A USB flash bulldoze could be unrecognized due to various reasons. This article will show yous how to solve the result when the wink drive is blinking but not recognized, and help you recover information from the unrecognized drive with the professional data recovery software.

Quick Navigation :

• Fix USB Flash Drive Not Showing Up Windows 10
• Recover Information from USB Flash Drive Non Recognized
• Conclusion
• USB Flash Drive Not Recognized FAQ
• User Comments

Have yous ever found your USB device not recognized by computer? Clearly, this is annoying because it stops you from accessing all the files and folders saved on that USB device. Wouldn't you want to work this out then y'all tin can continue using the device and regain the data?

Co-ordinate to the investigation, USB flash drive not recognized/USB wink drive non showing up/USB flash bulldoze non detected is a problem that bothers many users. So, today's topic is how to get a USB wink drive to work & how to recover data from a USB wink drive.

Yous should recover data from USB quickly equally soon every bit you regain access to them; otherwise, the files & folders may exist gone for good at whatever moment.

The most important affair you need to think is: stay at-home when you find a USB device not showing up. Then, follow these steps to repair your drive.

• Complete USB data recovery.
• Repair USB wink drive to make it usable.

A calm caput is a decisive factor to assist you speedily exit of the woods.

Fix USB Flash Drive Non Showing Up Windows 10

Why Your USB Flash Drive Is Not Showing Up/Recognized/Detected

Your USB flash drive cannot be detected when the estimator fails to load USB drive due to many reasons: missing/outdated/corrupted driver, USB becoming unallocated space, USB drive letter conflicts, etc. Whenever the USB flash drive not showing up on PC, you should troubleshoot the USB driver issues and then recover data from USB disk.

The following content shows you how to fix USB device not recognized error in Windows 10. After that, you'll exist told how to recover data from USB drive.

Method 1: Uninstall USB Devices

When a USB device is inserted into a estimator for the kickoff fourth dimension, the organization will prompt Found New Hardware and starting time to install the driver.

However, if the installation process is interrupted somehow, it will atomic number 82 to failure in loading USB drive unremarkably.

How to prepare:

1. Open up Device Manager.
2. Expand Universal Serial Coach controllers.
3. Find your USB device (it may be marked with an assertion point or shown as Unknown Device).
4. Correct click on your device and choose Uninstall Device.
5. Click on the Uninstall button in the pop-upwards window.
6. Wait a moment for the completion.
7. Click on the Activity carte du jour and select Scan for hardware changes.
8. Restart your computer. Disconnect and re-connect the drive to install the commuter properly.

Method two: Bank check USB Flash Drive in Deejay Management

Sometimes, your USB wink drive may be detected but not showing in Windows Explorer. You should open Windows Disk Management to check. If your USB device is not recognized just appears & becomes unallocated space in Deejay Direction, the outdated USB commuter should be blamed for. How to fix the USB not recognized result? You need to reinstall the USB device driver -> assign a letter to/create a new partition on the flash drive.

How to open and check in Disk Management:

1. Correct click on the Get-go button in the lower left corner of the PC screen.
2. Choose Deejay Management from the context menu.
3. Look for your USB flash drive.
4. The USB device would announced in Disk Management but not in Windows Explorer when the USB device has no drive letter of the alphabet or it becomes unallocated.
5. Two methods to fix USB flash drive when it shows up in Disk Management only doesn't appear in File Explorer: alter drive letter of the alphabet and create a new segmentation (yous should recover data from the unallocated space in advance).

How to change bulldoze letter in Disk Management:

1. Right click on the USB drive.
2. Choose Modify Drive Letter and Paths.
3. Click on the Add push.
4. Cull a drive letter yous like and click on the OK push to confirm.

How to create a partition in Disk Direction:

1. Right click on the unallocated infinite.
2. Choose New Simple Volume.
3. Keep the default value unchanged/alter them to the 1 you desire and click on the Next button to continue.
4. Click on the Finish button and wait a few seconds.

MiniTool Partition Wizard can as well aid you Change Drive Letter and Create Division.

Well, what if you find your flash drive not showing up in deejay management? Please read the following content to know how to get a reckoner to recognize your USB wink drive.

Method 3: Plug It into Another USB Port or Figurer

You should unplug your USB stick from the current USB port and endeavor plugging information technology into a different port on the computer. This will fail if the USB port is faulty, damaged, or dead; your USB bulldoze still tin can't be recognized. So, you should plug the USB stick into a dissimilar reckoner and see whether information technology tin be detected or not.

If this didn't piece of work, you should also endeavor to unplug & re-plug the computer.

Unplugging estimator is a simple solution to remove the power supply for both the computer and the motherboard. When the motherboard gets powered off, all hardware (including the USB ports) connected to the computer will be cut off. You should wait a few minutes to re-plug the power supply; then, the USB ports will exist rebooted and the drivers will exist reloaded, and then your USB wink bulldoze may exist recognized.

1. Shut downwardly your computer.
2. Unplug your computer from the wall outlet.
3. Expect for a few minutes.
4. Re-plug the PC into the outlet.
5. Power on the computer to check.

Method 4: Disconnect & Re-connect USB Devices

Please practise the post-obit things:

1. Eject the USB device from the current computer.
2. Reboot the reckoner.
3. Reconnect the USB flash drive to see whether information technology works at present.
4. If this fails, delight effort other USB ports on your estimator.
5. If it still doesn't work, please try to connect the USB bulldoze to some other figurer and encounter what happens.

Please keep reading if y'all still can't run into your USB flash drive.

Method 5: Enable USB Mass Storage Device

1. Right click on the First button in the lower left corner of the screen.
2. Choose Device Manager and scroll downwardly to find Universal Serial Motorcoach controllers.
3. Expand Universal Serial Double-decker controllers past clicking on the arrow in forepart of it.
4. Right click on the pick – USB Mass Storage Device.
5. Cull Enable device and wait a second until you find the icon for this option has been changed.
6. Now, go to check whether your USB drive is recognized on PC.

Method vi: Update the Device Driver

1. Right click on the Start push in the lower left corner of the screen.
2. Cull Device Manager.
3. Expand Disk drives to find your USB flash drive.
4. Cull Update commuter from the correct-click menu of your USB device.
5. Decide how exercise yous desire to search for drivers and click.
6. Consummate the rest steps according to prompts.

Method 7: Update Driver of Generic USB Hub

1. Open Device Director the way you like.
2. Aggrandize Universal Serial Jitney controllers.
3. Detect Generic USB Hub and correct click on it (if there is more one Generic USB Hub, please cull the first one).
4. Choose Update Commuter from the bill of fare.
5. Click Browse my computer for driver software.
6. Click Let me selection from a list of available drivers on my reckoner at the bottom.
7. Select Generic USB Hub from the model listing.
8. Click on the Next button.
9. Look a few seconds.
10. Click on the Close button when the drivers have been updated.
11. Echo the procedure for each Generic USB Hub listed.

Method eight: Disable Power Save of USB Root Hub

1. Open up Device Manager the way you like.
2. Expand Universal Serial Motorbus controllers.
3. Correct click on the USB Root Hub and cull Properties.
4. Select the Power Management tab.
5. Uncheck the Allow the figurer to plough off this device to relieve power option.
6. Click on the OK push to ostend.

Method 9: Connect to PC Directly

Don't use the hub.

Many people will buy a hub when the USB ports on their calculator are not plenty so they tin connect more USB drives to the computer. However, if at that place are too many USB devices continued to the same PC, some of them won't be recognized. In this case, yous should remove the hub and connect your USB flash drive to your PC directly.

Provide sufficient ability supply.

Besides, the hub may not supply sufficient power supply which volition as well result in USB flash bulldoze not recognized on Windows 10 or other systems. Each USB device can only work commonly under certain power supply conditions.

If the USB port provides insufficient power supply, these signs will appear:

• The USB indicator does not flash or its land is aberrant.
• The system fails to boot as usual afterwards the USB device was connected to the computer.
• The content in USB device tin't be accessed or the access speed is much slower than before.

You should provide a split up external power supply to the USB device.

Method x: Apply Hardware and Devices Troubleshooter

1. Press Start + I on the keyboard to open the Settings window.
2. Cull Update and Security.
3. Select Troubleshoot from the left side.
4. Choose Hardware and Devices under Find and fix other problems department.
5. Click on Run the troubleshooter button.
6. Wait for the process to complete.

Method xi: Uninstall Hidden Devices

In Device Manager, non all the devices that were installed are shown by default. It only lists the frequently used and newly installed devices. Therefore, if the USB device has a conflict with a previously installed device which doesn't show up in Device Director, information technology can't be detected. Therefore, y'all should uninstall the hidden devices in order to load your USB flash bulldoze normally.

How to view subconscious devices in Device Director:

1. Run Command Prompt as administrator.
2. Blazon gear up DEVMGR_SHOW_DETAILS=i and press Enter.
3. Type set DEVMGR_SHOW_NONPRESENT_DEVICES=1 and printing Enter.
4. Type start devmgmt.msc and press Enter.

How to uninstall the hidden devices:

1. Select the View tab.
2. Click Bear witness hidden devices.
3. Aggrandize Disk drives, Portable Devices, Universal Serial Bus Controllers or another folder y'all think could contain the hidden device.
4. Wait for the Unknown Device or the device which is greyed out.
5. Right click on the device and choose Uninstall Device.
6. Click Uninstall and await.
7. Refresh the list or you can remove the USB wink drive from computer & connect it again to meet whether it can be recognized.

Method 12: Format Drive to FAT32

If the USB wink bulldoze is used on Xbox 360 when you lot detect flash drive can't exist recognized, there'south a special reason why it is not detected by Xbox 360: the first sectionalisation of USB flash drive is not a FAT32 sectionalization.

Useful Tips On Recovering Data From Xbox One Hard Drive By Yourself.

Since Xbox 360 could only recognize the USB flash drive under the condition that its beginning drive is formatted as FAT32, y'all must check the file organisation of USB flash bulldoze to see whether it is FAT32. If not, please go the MiniTool Segmentation Wizard to help you.

Situation one: if the USB bulldoze is formatted every bit NTFS, you demand to convert NTFS to FAT32 by following steps:

1. Run MiniTool Partition Sorcerer.
2. Right click on your USB wink drive.
3. Choose Convert NTFS to Fat from the correct-click menu.
4. Press Utilise button in the upper left corner and cull Yes to apply changes.
5. Wait for the process to complete.

Please note: the Convert NTFS to Fat is not available in the free edition.

Situation two: if it has another type of file organization, please Format Segmentation to FAT32 by following steps:

1. Run MiniTool Division Wizard.
2. Select your USB flash bulldoze.
3. Choose Partitioning from the card bar.
4. Select Format from the submenu.
5. Choose FAT32 as the file arrangement and click on the OK button in the Format Partition Window.
6. Press Apply and cull Yes in the prompt window to apply changes.
7. Await for the operations to complete.

Click to tweet

Just high-five yourself if you solved your problem after reading the above content. Nonetheless, if accidents happen while yous're trying to fix the wink bulldoze non detected problem, information saved in USB flash bulldoze could easily be put in danger. So yous must be equally careful as you can.

FYI: If y'all can't detect your USB external hard drive after connecting it to the computer, you should get help from this page:

The problem – external difficult drive not showing up/recognized/detected – can be fixed easily by following ways.

Other Possible Solutions

• Effort a different USB cable.
• Enable USB support in BIOS.
• Update the BIOS (how to fix PC not booting after BIOS update).
• Impale virus and malware (how to recover files lost due to virus set on).
• Get the latest USB driver bundle or observe the original CD commuter from manufacturers' official website.

If the flash drive is not detected on any computer after trying the above methods, it may exist damaged physically. Please buy a new USB flash drive to replace it.

Recover Information from USB Flash Bulldoze Not Recognized

Become a Smashing Tool for USB Drive Information Recovery

The first affair you're supposed to do is getting MiniTool Ability Data Recovery, a slice of reliable information recovery software, and installing information technology properly on your computer that works fine. (The following content is based on Windows platform; if y'all'd similar to recover data from USB flash drive not recognized on Mac, please resort to Stellar Data Recovery.)

Delight don't worry if you lot are a novice computer user; MiniTool Ability Information Recovery can help you complete USB flash drive data recovery easily in time.

Free Download

How to Recover Data from USB Flash Drive

You just demand to complete the post-obit 3 steps to retrieve lost files from a USB flash drive.

Step one: connect your USB drive to PC. Install the software and run it immediately to run across the primary interface. Here, Logical Drives will exist selected by default.

• If you lot merely take one segmentation on the USB flash drive, you lot may go on information technology unchanged.
• Otherwise, you should shift to Devices at the tiptop.

Pace ii: select the USB flash drive from the right-hand console. Then, perform a full browse on it by clicking on the Scan push button.

Step 3: browse the scan outcome to option out all the data you want to recover by adding a check mark into the square box in forepart of them. Then, press the Salve push button to set a safe storage location for the files waiting to exist recovered.

Click to tweet

Related reading:

• This tells all almost how to recover deleted files from USB.
• Read this if you want to know how to fix a broken USB bulldoze.

Conclusion

In a word, the USB interface makes information technology a cakewalk to exchange data among unlike computers and devices. But there's a smashing hazard that yous may find yourself stuck in this situation: afterward connecting the USB wink drive to your PC or other devices through a USB port, you disappointedly find the USB flash bulldoze is not being recognized.

This is non a rare problem; hundreds of thousands of users are facing or have met the same situation. Therefore, I summarized 12 common methods and other possible solutions for you to gear up the upshot, making your USB wink drive show up on the computer and become usable once again.

USB Flash Drive Not Recognized FAQ

Why is my USB wink drive not showing upwardly?

The most likely reason the USB flash drive doesn't display is the USB commuter problem. If the driver is too outdated, damaged or missing, your device finds no mode to communicate with the flash bulldoze, so information technology can't display the bulldoze for you lot (the flash drive is not recognized).

How do I reinstall USB drivers?

1. Download the latest version of driver for your USB drive. Motility to the text footstep if it fails.
2. Open Device Director the way you similar.
3. Wait for the device driver for your USB wink drive.
4. Correct click on it and choose Uninstall device.
5. Click Uninstall and wait.
6. Shut Device Manager and reboot PC.

Can a broken USB flash bulldoze exist fixed?

A USB flash drive can exist broken logically or physically. In the former case, yous accept a good adventure of retrieving the lost data from the broken USB bulldoze; while in the latter example, you have no pick but to take risk and send your drive to the professionals.

What'due south a lawmaking 43 for driver error?

When the lawmaking 43 occurs on your PC, you should realize Windows is informed by the graphics device driver that the certain drive is non working properly. This may be caused by lots of reasons: such every bit damaged/missing driver and hardware trouble.

stewarttignark.blogspot.com

Source: https://www.minitool.com/data-recovery/usb-flash-drive-not-recognized.html

Share this post